www.gowanda.com one magnetics pkwy, gowanda, ny 14070 ? (t) 716-532-2234 ? (f) 716-532-2702 ? sales@gowanda.com 73 power inductors - leaded ga20lf rohs high current power inductors part nominal maximum saturation* current** number inductance dcr current rating 10% @ 1khz ohms adc adc GA20-101KLF 1.0h .009 12.00 5.558 ga20-121klf 1.2h .010 11.00 5.272 ga20-151klf 1.5h .011 10.60 5.027 ga20-181klf 1.8h .012 10.00 4.813 ga20-221klf 2.2h .013 9.50 4.624 ga20-271klf 2.7h .014 9.20 4.456 ga20-331klf 3.3h .016 7.50 4.168 ga20-391klf 3.9h .017 7.40 4.044 ga20-471klf 4.7h .022 7.00 3.555 ga20-561klf 5.6h .024 6.50 3.403 ga20-681klf 6.8h .026 6.10 3.270 ga20-821klf 8.2h .028 5.60 3.151 ga20-102klf 10 h .033 4.10 2.902 ga20-122klf 12 h .037 3.60 2.741 ga20-152klf 15 h .040 3.30 2.636 ga20-182klf 18 h .044 3.00 2.514 ga20-222klf 22 h .050 2.70 2.358 ga20-272klf 27 h .058 2.50 2.190 ga20-332klf 33 h .075 2.20 1.925 ga20-392klf 39 h .094 2.00 1.720 ga20-472klf 47 h .109 1.80 1.597 ga20-562klf 56 h .140 1.70 1.409 ga20-682klf 68 h .145 1.50 1.385 ga20-822klf 82 h .152 1.40 1.352 ga20-103klf 100 h .208 1.20 1.156 ga20-123klf 120 h .283 1.10 .991 ga20-153klf 150 h .340 1.00 .904 ga20-183klf 180 h .362 .950 .876 ga20-223klf 220 h .430 .860 .804 ga20-273klf 270 h .557 .770 .706 ga20-333klf 330 h .665 .700 .647 ga20-393klf 390 h .772 .640 .600 ga20-473klf 470 h 1.150 .590 .491 ga20-563klf 560 h 1.270 .540 .468 ga20-683klf 680 h 1.610 .490 .416 ga20-823klf 820 h 1.960 .440 .377 ga20-104klf 1.0 mh 2.30 .400 .348 ga20-124klf 1.2 mh 2.65 .350 .324 ga20-154klf 1.5 mh 3.45 .330 .284 ga20-184klf 1.8 mh 4.03 .290 .263 ga20-224klf 2.2 mh 4.48 .270 .249 ga20-274klf 2.7 mh 5.90 .240 .217 ga20-334klf 3.3 mh 6.56 .220 .206 ga20-394klf 3.9 mh 8.65 .200 .179 ga20-474klf 4.7 mh 10.50 .180 .163 ga20-564klf 5.6 mh 13.90 .166 .141 ga20-684klf 6.8 mh 16.30 .151 .131 ga20-824klf 8.2 mh 20.80 .138 .116 ga20-105klf 10 mh 26.40 .125 .103 n otes: ? operating temperature -55c to +125c *saturation current is the approximate value that will reduce the initial inductance by 5% **rated current is based on a 35c temperature rise at an ambient temperature of 90c. in order to obtain the highest possible satura - tion (incremental) current, a low resistivity fer - rite core is used for this series. the core will appear as a resistor of about 1,000 ohms in parallel with the winding and should be taken into consideration in circuits with a high ac voltage (ripple). ? parts are printed tape and reel specs: pcs./12 reel maximum: 1000 pitch between parts: .400 inches inside tape spacing: 2.062 inches class: 1 .260 (6.604) max. .630 (16.002) max. 1.250 (31.75) min. typ . #20 aw g (.032 .002) (.813 .051) in. (mm) power inductors - thru hole
|